Sr-9000 Mode; Character Size Setting - Sekonic SR-6500 HYBRID Operating Manual

■ SR-9000 mode

1.

Character size setting

The width of a character can be increased in 0.8mm increments between 4.0mm
and 6.4mm.
No.
1
2
3
4
(1) Press the
(2) Use the
and press the
(3) Use the
and press the
*
(" " mark flashes in the first column of the first line on the LCD.)
(4) Use the
(5) Press the
(The flashing "
(6) Keep pressing the
or press the
Width (a)
4.0mm
4.8mm
5.6mm
6.4mm
MENU
switch to enter the menu mode.
UP DOWN
and switches to select the following parameters,
FEED/ENTER
switch.
UP DOWN
and switches to select [Size] setting,
FEED/ENTER
switch.
UP DOWN
and switches to set the value.
FEED/ENTER
switch to save the setting value into memory.
*
" mark disappears from the LCD.)
CLEAR/EXIT
switch until it returns to normal mode,
MENU
switch to return to normal mode.
Printer settings ■ R-9000 mode
About 3mm
a
Character size(width)
setting values
4.0 - 6.4 (mm)
0.8mm increments
-53-