Sekonic SR-6500 HYBRID Operating Manual page 89

Product specifications
Note 1)
Left margin skew detection is used to determine if the left margin is skewed by checking the
edge of the left margin on the back of a sheet. If colors other than shades of white are printed
on the back of the sheet, detection may not work properly. For such cases, set left margin
skew detection to [Off]. Please be aware that sheet print colors that may cause detection to
work incorrectly may differ depending on the reading mode.
Reading mode
Grayscale
Color
Red
Dropout
Green
color
Blue
S e e
"Error detection settings" in this manual on P.44 .
Note 2)
When feeding sheets that have pictures attached, check and verify the items listed below and
make sure to complete a test run before actually feeding in any sheets.
(1) The maximum thickness for a picture that can be attached onto a sheet is approx. 0.3 mm
(including the thickness of the sheet and the thickness of the picture).
(2) Do not attach pictures into areas that are up to 75 mm from the left margin of the sheet (for
both front and back).
(3) Attach pictures that have not been
folded and that have no fold lines. For
pictures that have a curl in them, only
attach pictures with a curl of 1 mm or
less.
(4) Make sure that attached pictures are
not lifting away from or peeling off from
the sheets.
(5) The edges of sheets with a low stiffness
2
of 72 kg (84 g/m ) or less may sag on the stacker and become uneven around where pictures
are attached, which could cause the sheet to get caught and become jammed in the machine,
which is why sheets should be fed in one sheet at a time in such cases.
Note 3)
Guidelines for the number of sheets read when an image reading sensor is in use (while
images are being acquired) are as given below.
(Reference values)
300dpi 1240 sheets/hour
200dpi 2380 sheets/hour
150dpi 3300 sheets/hour
100dpi 4500 sheets/hour
*Conditions for mark reading : 46 rows, 66 columns, 1/6" dual-sided reading
*The number of sheets read may differ depending on the configuration of the computer being used or
effects of other software programs that are installed.
-88-
Sheet print colors that are often detected incorrectly (back side)
Colors other than shades of white
Colors other than shades of red
Colors other than shades of white
Colors other than shades of green
Colors other than shades of blue
Outside of the paste area
(For both front and back)
Left margin of sheet
Color Grayscale
4200 sheets/hour
5100 sheets/hour
5150 sheets/hour
5150 sheets/hour
Sheet size : A4
Reading method : Marks + image (JPEG compression quality 90)
PC specifications : CPU Intel Core i5 2.6 GHz
75mm
Memory 4 GB
OS: Windows 7 Pro SP1 (32 bit)
Interface: USB 2.0 Hi-Speed
Feed Direction