Setting Paper Weight - Sekonic SR-6500 HYBRID Operating Manual

■ Setting paper weight

1.
The device is equipped with a function to detect double-feeding (DF) errors.
Conduct [Paper Weight]*1 according to the thickness of the paper to be used.
*1 Setting reading
S e e "Data reading settings ■ setting paper weight" in this manual. P.42
Set the paper weight dial to prevent double feeding.
Paper weight value is for reference only, so adjust it according to the condition of
the paper to be used.
2.
There is a mechanism which adjusts paper interval with the paper weight dial to
prevent double feeding. Adjusts the paper weight dial to the sheet which you use.
Note)
1.Because as for thickness of the sheet there is a variation depending
upon papery quality, increase and decrease with conveying circumstance.
2.When this dial sets extremely small(narrow),there are case which it
becomes cause of the paper clogging and the sheet skew.
3.If tears appear at the end of the paper on the back side, move the
setting for the ream weight dial up to around the second mark. This
should help resolve the tear problems.
*2 Setting paper weight dial
(initially set to a paper weight of 105g/m
(initially set to a paper weight of 105g/m
Align the arrow to the paper weight.
Operation ■ Setting paper weight
2
.)
2
.)
-29-