Sekonic SR-6500 HYBRID Operating Manual page 32

5.
Lift the cartridge case lever and insert an ink cartridge.
Note)
Align positioning pins (2 places) of the ink cartridge with the positioning
holes (2 places) of the cartridge case.
Positioning holes
6.
Lower the cartridge case lever to lock the ink cartridge.
7.
Loosen the cartridge case fixing screw, move the cartridge case according to the
desired printing position, and tighten the screw to secure it.
* The scale on the positioning sticker indicates the printing position from the edge
of the paper. The printing position is determined by aligning the cartridge case
fixing screw with the scale on the sticker.
Positioning sticker
Operation ■ Stacker unit (printer) preparation
Lever
Align positioning pins
Fixing screw
Cartridge case
-31-