Buzzer Settings; Buzzer Control - Sekonic SR-6500 HYBRID Operating Manual

Buzzer settings ■ Buzzer control

Buzzer settings

You can set the device to either use the buzzer or not use it.
If you set it to use the buzzer, you can set the volume and tone.
If you set it not to use the buzzer, the buzzer will not sound.

■ Buzzer control

1.
MENU
Press the
2.
UP
Use the and
and press the
3.
UP
Use the and
and press the
*
(" " mark flashes in the first column of the first line on the LCD.)
4.
UP
Use the and
5.
FEED/ENTER
Press the
(The flashing "
6.
Keep pressing the
or press the
-46-
switch to enter the menu mode.
DOWN
switches to select the following parameters,
FEED/ENTER
switch.
DOWN
switches to select [Buzzer Control] setting,
FEED/ENTER
switch.
DOWN
switches to set the value.
switch to save the setting value into memory.
*
" mark disappears from the LCD.)
CLEAR/EXIT
switch until it returns to normal mode,
MENU
switch to return to normal mode.
Buzzer control
setting values
• Valid
• Invalid