Printer Unit Precautions For Use - Sekonic SR-6500 HYBRID Operating Manual

Operation ■ Printer unit precautions for use

■ Printer unit precautions for use

(1) Under the following conditions, remove the ink cartridge from the device, and
store it at room temperature (10-35°C) in the ink cartridge storage bag included in
the package.
• If the main device is stored in an environment outside operating condition
parameters.
• If the printer will not be used for a long time (about 1 week or more).
(2) Under the following conditions, defective printing (cannot print, streaked printing)
may occur.
• Ink cartridge is stored in environments outside of operating conditions.
• The printer unit is left installed in the main device and is not used for a
long time (about 1 week or more).
If you have printing problems, you can try to fix them by conducting a
printer jet test.
If the problem doesn't improve, the ink head may be dirty.
Remove the ink cartridge and clean the ink head.
Cleaning method:
Wet a napless (low nap) cloth, tissue paper, or other similar item (tissue
hereinafter) with water.
Apply the wet tissue to the ink head for several seconds.
Gently wipe the ink head.
If there is any ink left on the ink head, gently wipe it off with a dry
tissue.
(3) This device consumes the ink little by little even when it does not print. Because
it conducts extra injection automatically to prevent clogging up of ink cartridge. If
you do not use the printer function,set printer control the invalid and then remove
the ink cartridge and keep. And cutting down on consuming the ink becomes
possible.
(4) When you do not use the printer, move the case of cartridge to almost central
position of the width of the sheet you use. It may reduce jam.
-34-
Ink head