Sekonic SR-6500 HYBRID Operating Manual page 7

Optical mark reader
Hide thumbs Also See for SR-6500 HYBRID:
Table of Contents

Advertisement

Warning
● Fire or electric shock may result if this product continues to be used
when there is a strange smell or sound.
In such a case, immediately turn the power switch off and then remove
the power plug from the outlet. After making sure that it is no longer
smoking, ask the sales shop for repair service.
Never attempt to repair by yourself since that may be very dangerous.
● Do not modify or disassemble this device. That could cause fire or
electric shock.
● Do not remove the cover from this device. That could cause electric
shock. Ask the sales shop to conduct any inter nal checking,
adjustment or repair.
Pay thorough attention to the above instructions. Otherwise, fire or
electric shock may occur.
● Power plug precautions
• Do not pull on the cord when removing the power plug from the outlet.
• Do not use any power plug other than the specified one.
Make sure to use the adapter included in the package.
● Device precautions
• Do not use it with a supply voltage other than the specified one.
• Do not install it in a place that may be wet with water or oil, steam,
moisture or dust.
• Do not insert or drop any metal, foreign combustible matter, etc., into
the port.
• Do not place containers with chemicals or water, or small metal pieces
near the device.
● Do not cover the vent hole. That could cause heat retention, resulting
in fire.
● If the device is dropped or the cover is broken, immediately turn the
power switch off and remove the power plug from the outlet. Then,
contact the sales shop.
● If any foreign matter should enter inside, immediately turn the power
switch off and remove the power plug from the outlet. Then, contact
the sales shop or Sekonic. If the device continues to be used with
foreign matter inside, fire or electric shock may occur.
If water or other substances penetrate the unit, immediately turn the
power switch off and remove the power plug from the outlet. Then,
contact the sales shop or Sekonic. If the device continues to be used with
water or other foreign matter inside, fire or electric shock may occur.
● Do not spray any materials containing an inflammable gas or liquid on
the device and be sure to keep this kind of materials away from this
device.
Use a cleaning cloth with suitable amount of cleaning liquid to wipe
off well, after removing the power plug from the outlet and the device
becomes to cool off.
-6-
Warning

Advertisement

Table of Contents
loading

Table of Contents