Sekonic SR-6500 HYBRID Operating Manual page 53

Printer settings ■ SR-6500 mode
(1) Press the
(2) Use the
and press the
(3) Use the
and press the
*
(" " mark flashes in the first column of the first line on the LCD.)
(4) Use the
(5) Press the
(The flashing "
(6) Keep pressing the
or press the
[Setting example 1]
When the size(width) is set at 4.0mm and the interval is 0.8mm.
[Setting example 2]
When the size(width) is set at 6.4mm and the interval is 5.6mm.
-52-
MENU
switch to enter the menu mode.
UP DOWN
and switches to select the following parameters,
FEED/ENTER
switch.
MENU DOWN
and switches to select [Character Pitch] setting,
FEED/ENTER
switch.
MENU DOWN
and switches to set the value.
FEED/ENTER
switch to save the setting value into memory.
*
" mark disappears from the LCD.)
CLEAR/EXIT
switch until it returns to normal mode,
MENU
switch to return to normal mode.
Character pitch
setting values
0.8 - 92.0 (mm)
0.1mm increments
4.0mm 4.0mm
0.8mm
6.4mm 6.4mm
5.6mm