Warnings - Sekonic SR-6500 HYBRID Operating Manual

Error displays and countermeasures
[Stacker unit]
Jam at printing
start detection sensor
Jam at main paper
discharge sensor
Jam at selected paper
discharge sensor
2.

Warnings

(1) Components
Back side reading unit
unconnected
Barcode unit unconnected
Printer unit unconnected
Stacker unit unconnected
Non connection of
Image reading unit
(2) Paper feeding
Sheet empty
Double feed error
Left end skew error
-100-
Error Explanation
A paper jam occurred at the
printing start detection sensor.
A paper jam occurred at the
main paper discharge sensor.
A paper jam occurred at the
s e l e c t e d p a p e r d i s c h a rg e
sensor.
Error Explanation
Back side reading unit is not
installed.
The barcode unit is
notconnected to the device.
• Printer unit is not installed.
• Printer cartridge is not installed.
Stacker unit is not connected.
Image reading unit
unconnecedt
Error Explanation
There is no paper in the hopper
or the internal units.
Two or more sheets were fed
simultaneously.
Paper was fed croockdly.
Code Procedures for Resolving and Clearing Errors
• Remove any sheets that have
I1
become jammed or sheets
inside the device.
• Press the CLEAR switch
I2
(or execute the clear error command).
• Check to make sure there
are no foreign objects within
the machine and remove as
I3
necessary
Code Procedures for Resolving and Clearing Errors
• Check if the back side reading
u n i t i s c o n n e c t e d t o t h e
P1 device.
• Press the CLEAR switch
(or execute the clear error command).
• Check if the barcode unit
is connected to the device.
P2
• Press the CLEAR switch
(or execute the clear error command).
• Press the CLEAR switch
P3
(or execute the clear error command).
• Set printer control invalid.
• Check if the stacker unit is
connected to the device.
P4
• Press the CLEAR switch
(or execute the clear error command).
• Check if the Image reading unit
is connected to the device.
P5
• Press the CLEAR switch
(or execute the clear error command).
Code Procedures for Resolving and Clearing Errors
• Press the CLEAR switch
(or execute the clear error command).
Q1
• Place paper back on the
hopper.
• Press the CLEAR switch
(or execute the clear error command).
• Separate the sheets to
loosen them before placing
Q2
t h e m o n t h e h o p p e r t o
prevent jams.
• Check the setting for the
paper weight dial.
• Press the CLEAR switch
(or execute the clear error command).
• Check the position of the
Q3 paper guide and make sure
that positioned so as to ensure
that the sheets are being lined
up properly.