Feed Test 2 - Sekonic SR-6500 HYBRID Operating Manual

■ Feed test 2

This test reads the check sheets included in the package to test if the device reads them
properly.
Even if the device doesn't read something properly, the test will continue.
Once reading of the check sheets starts, the test will continue until an error other than a
reading occurs or the hopper is empty.
1.
MENU
Press the
2.
UP
Use the and
and press the
3.
UP
Use the and
4.
FEED/ENTER
Press the
*
(" " mark flashes in the first column of the first line on the LCD.)
5.
UP
Use the and
6.
FEED/ENTER
Press the
(The flashing "
7.
Keep pressing the
or press the
Note)
• You cannot return to normal mode while the test is running.
• If a reading error occurs on both sides of a sheet, the error count will
be two.
switch to enter the menu mode.
DOWN
switches to select the following parameters,
FEED/ENTER
switch.
DOWN
switches to select [Feed Test 2].
switch to confirm the selection and display [Feed Test 2].
DOWN
switches to select the setting value.
switch to start/stop feed test 2.
*
" mark disappears from the LCD, and the test will start/stop.)
CLEAR/EXIT
switch until it returns to normal mode,
MENU
switch to return to normal mode.
Operating tests ■ Feed test 2
Feed test 2 setting values
• Stop • Start
-67-