Character Interval Setting - Sekonic SR-6500 HYBRID Operating Manual

UP
(4) Use the
FEED/ENTER
(5) Press the
(The flashing "
(6) Keep pressing the
or press the
[Setting example 1]
When the size(width) is set at 4.0mm
[Setting example 2]
When the size(width) is set at 6.4mm
2.

Character interval setting

The space between printed characters can be increased in 0.1mm increments
between 0.8mm to 92mm.
No. Interval (b)
1
2
3
:
911 91.8mm
912 91.9mm
913 92.0mm
DOWN
and switches to set the value.
switch to save the setting value into memory.
*
" mark disappears from the LCD.)
CLEAR/EXIT
switch until it returns to normal mode,
MENU
switch to return to normal mode.
0.8mm
0.9mm
1.0mm
:
Printer settings ■ SR-6500 mode
Character size(width)
setting values
4.0 - 6.4 (mm)
0.8mm increments
4.0mm
6.4mm
b
-51-