Character Magnification Setting - Sekonic SR-6500 HYBRID Operating Manual

Printer settings ■ SR-9000 mode
2.

Character magnification setting

Width can be magnified between 1 to 15 times.
Character width = size x magnification
(1) Press the
(2) Use the
and press the
(3) Use the
and press the
*
(" " mark flashes in the first column of the first line on the LCD.)
(4) Use the
(5) Press the
(The flashing "
(6) Keep pressing the
or press the
[Setting example 1]
When the size(width) is set at 4.0mm and magnification is 1.
Character width = 4.0 x 1 = 4.0mm
[[Setting example 3]
When the size(width) is set at 4.0mm and magnification is 2.
Character width = 4.0 x 2 = 8.0mm
-54-
MENU
switch to enter the menu mode.
UP DOWN
and switches to select the following parameters,
FEED/ENTER
switch.
UP DOWN
and switches to select [Magnification] setting,
FEED/ENTER
switch.
UP DOWN
and switches to set the value.
FEED/ENTER
switch to save the setting value into memory.
*
" mark disappears from the LCD.)
CLEAR/EXIT
switch until it returns to normal mode,
MENU
switch to return to normal mode.
Character magnification
setting values
1 - 15 (Times)
4.0mm
8.0mm