Interface Settings; Interface Setting (Device Id Setting) - Sekonic SR-6500 HYBRID Operating Manual

Operation ■ Connecting to a computer
1-2.

Interface settings

(1) Press the
(2) Use the
and press the
(3) press the
*
(" " mark flashes in the first column of the first line on the LCD.)
Set any number using the
(4) Press the
(The flashing "
(5) Keep pressing the
or press the
-20-
MENU
switch to enter the menu mode.
UP DOWN
and switches to select the following parameters,
FEED/ENTER
switch.
FEED/ENTER
switch to begin [Device ID] setting.
UP
and
FEED/ENTER
switch to save the setting value into memory.
*
" mark disappears from the LCD.)
CLEAR/EXIT
switch until it returns to normal mode,
MENU
switch to return to normal mode.
DOWN
switches.
Device ID
setting value
0-126