Sekonic SR-6500 HYBRID Operating Manual page 29

Operation ■ Loading paper
CAUTION)
1) Be extremely careful when handling sheets of paper so as not to
bend or tear the paper.
Errors may occur to use bend or tear OMR sheet.
Do not attempt to use sheets that are dirty or torn, sheets that have
garbage or other contaminants attached to them, or multi-fold sheets
(with two or four folds, etc.) that are perforated. If wanting to use
paper that is curled, straighten the paper first so that it is flat before
putting it in the unit.
2) To add sheets, lower the paper feed table, place extra sheets on it,
and then reset it anew before proceeding.
Double-feeding problems may occur if sheets get stuck together.
Make sure to separate sheets of paper as shown at left before
placing them on the paper feed table.
3) When storing paper, avoid keeping it in a place subject to sudden
environmental changes. Pay thorough attention to moisture and keep
paper in a cabinet or other safe place. Do not leave paper in a dusty
place such as near a window.
-28-
Tear
Warp
Bend
Fold
Turn-over Folding line
Folded sheets
Upward curled sheets
Adhesive
cellophane tape
Turn-over
Rumple
Fold
Adhesive
cellophane tape
Downward curled sheets
Dirt
Staple