Paper Size Setting - Sekonic SR-6500 HYBRID Operating Manual

■ Paper size setting

This device can be set "A4 size (11.7inch)" or "14inch size"
"A4 size (11.7inch)" mode is use for A4 size (length: 297mm) or short length sheet.
"14inch size" is use for over 298mm length sheet.
Note
*"A4 size (11.7inch)" mode is for reading of A4 (length :297mm) size or short length paper.
(The line speed will be 1,240mm.)
*"14inch size" mode is for reading over 298mm (length) paper.
(If set "14inch size" to read of A4 (length :297mm) or short length paper, it line speed will
be slow.)
*The printing position and Barcode reading position depends on Sheet size setting.
Refer to Page 89 of Printer unit specifications and Page 90 of Barcode unit specifications.
1.
MENU
Press the
2.
UP
Use the and
and press the
3.
UP
Use the and
and press the
*
(" " mark flashes in the first column of the first line on the LCD.)
4.
UP
Use the and
5.
FEED/ENTER
Press the
(The flashing "
6.
Keep pressing the
or press the
switch to enter the menu mode.
DOWN
switches to select the following parameters,
FEED/ENTER
switch.
DOWN
switches to select [Paper size] setting,
FEED/ENTER
switch.
DOWN
switches to set the value.
switch to save the setting value into memory.
*
" mark disappears from the LCD.)
CLEAR/EXIT
switch until it returns to normal mode,
MENU
switch to return to normal mode.
Data reading settings ■ Setting reading side
Sheet size
setting values
• Standard(14inch) (Default)
• A4size(11.7inch)
-43-