Setting Reading Method - Sekonic SR-6500 HYBRID Operating Manual

■ Setting reading method

Setting mark-reading method.
There are six kinds of reading methods: "Top-end timing control type," "Bottom-end timing
control type," "Direct under type," "FACOM," "Mark to mark type (without top-end margin
reading)," and "Mark to mark type (with top-end margin reading)."
When setting to "top-end timing control type" or "bottom-end timing control type," you need
to set a control multiple number.
MENU
1. Press the
UP
2. Use the and
and press the
UP
3. Use the and
and press the
*
(" " mark flashes in the first column of the first line on the LCD.)
UP
4. Use the and
FEED/ENTER
5. Press the
(The flashing "
6. Keep pressing the
or press the
Data reading settings ■ Setting reading method
switch to enter the menu mode.
DOWN
switches to select the following parameters,
FEED/ENTER
switch.
DOWN
switches to select [Reading Method] setting,
FEED/ENTER
switch.
DOWN
switches to set the value.
switch to save the setting value into memory.
*
" mark disappears from the LCD.)
CLEAR/EXIT
switch until it returns to normal mode,
MENU
switch to return to normal mode.
Reading method
setting values
• Control Fore
• Control Back
• Direct
• FACOM
• Mark to Mark
*
• Mark to Mark
-37-