Sr-6500 Mode; Character Size Setting - Sekonic SR-6500 HYBRID Operating Manual

Printer settings ■ SR-6500 mode

SR-6500 mode

Character size setting ................................................... P.50
Character interval setting .............................................. P.51
• See P.50 and subsequent pages for SR-6500 mode.
SR-9000 mode
Character size setting ................................................... P.53
Character magnification setting .................................... P.54
Character interval setting .............................................. P.55
• See P.53 and subsequent pages for SR-9000 mode.
■ SR-6500 mode
1.

Character size setting

The width of a character can be increased in 0.8mm increments between 4.0mm
and 6.4mm.
No.
1
2
3
4
(1) Press the
(2) Use the
and press the
(3) Use the
and press the
*
(" " mark flashes in the first column of the first line on the LCD.)
-50-
Width (a)
4.0mm
4.8mm
5.6mm
6.4mm
MENU
switch to enter the menu mode.
UP DOWN
and switches to select the following parameters,
FEED/ENTER
switch.
UP DOWN
and switches to select [Size] setting,
FEED/ENTER
switch.
About 3mm
a