Philips DVDR615 Service Manual page 69

http://www.jdwxzlw.com/?fromuser=华盛维修
Nucleus Name DS_FRE_ChannelSelect
200102
200103
200104
Example DS:> 2001 3456 0
1200100:
Test OK @
Nucleus Name DS_FRE_AFCReferenceVoltage
Nucleus Number 2002
Description This nucleus stores the reference voltage for the tuner in the factory settings
Technical -
-
-
Execution Time Less than 1 second.
User Input The reference voltage to store, in a range between 0 and 255. (dec.)
Error Number
200200
200201
200202
200203
200204
Example DS:> 2002 0xaa
200200:
Test OK @
Note European sets only!!
Nucleus Name DS_FRE_CommunicationIfModule
Nucleus Number 2003
Description This nucleus checks the communication with the IF(Intermediate Frequency) module
of the front end
Technical Determine whether the IF module can be read through IIC
Execution Time Less than 1 second
User Input -
Error Number
200300
200301
200302
200303
200304
200305
200306
200307
Example DS:> 2003
200300:
Test OK @
Nucleus Name DS_FRE_TunerTypeGet
Nucleus Number 2004
Description This nucleus retrieves the tuner type information and translates this to the region
involved as well.
Technical -
-
Execution Time Less than 1 second
User Input -
Error Number
200400
200401
200402
Example DS:> 2004
200400: NAFTA Tuner: TCMN0682
Test OK @
家电维修资料网，免费下载各种维修资料
Diagnostic Software
Getting the version of the set failed
Configuration of the tuner failed
Configuration of the IF module failed
Parse the user input
Initialise IIC and NVRAM-connection
Put the new values in NVRAM
Description
Storing the reference voltage for the tuner succeeded
The user provided wrong input
The section in NVRAM could not be validated after write
Writing the value to NVRAM failed
Initialisation of IIC failed or NVRAM unreachable
Description
Communicating with the front end succeeded
The IIC bus was not accessible
There was a timeout reading the device
The IIC acknowledge was not received
An IIC-bus error occurred
Got unknown IIC bus error
The IIC bus initialisation failed
Not a Europe set
Check the region through the ASP
Read out the tuner type through IIC
Description
Getting the tuner type information succeeded
Getting the type of the tuner OK, but unknown type
returned
Getting the tuner type information failed
DVDR615/69 5. EN 69