Philips DVDR615 Service Manual page 34

http://www.jdwxzlw.com/?fromuser=华盛维修
EN 34 5. DVDR615/69
Nucleus Name
Nucleus Number
Description
Technical
Execution Time
User Input
Error
Example
Nucleus Name
Nucleus Number
Description
Technical
Execution Time
User Input
Error
Example
Nucleus Name
Nucleus Number
Description
Technical
Execution Time
User Input
家电维修资料网，免费下载各种维修资料
Diagnostic Software
DS_BE_TrayOut
904
Open the tray of the basic engine
- Check if an AV2 or AV3 is connected
- In case of an AV2 Send the S2B TRAY_OUT command
- In case of an AV3 send an ATAPI START_STOP_UNIT command
Approximately 2 seconds
None
Number Description
90400 The command executed successfully
90401 There was a time-out while communicating
90402 The Basic Engine returned an unexpected result
90403 The BE returned an error code
90404 No acknowledge received from BE
90405 Unable to enter normal mode
90406 Communicating with the Basic Engine failed
DS:> 904
090400:
Test OK @
DS_BE_TrayIn
905
Close the tray of the basic engine
- Check if an AV2 or AV3 is connected
- Send the S2B TRAY_IN command
- In case of an AV3 send an ATAPI START_STOP_UNIT command
Approximately 1 - 2 seconds
None
Number Description
90500 The command executed successfully
90501 There was a time-out while communicating
90502 The Basic Engine returned an unexpected result
90503 The BE returned an error code
90504 No acknowledge received from BE
90505 Unable to enter normal mode
90506 Communicating with the Basic Engine failed
DS:> 905
090500:
Test OK @
DS_BE_WriteReadDvdRw
906
Write data to and read data from a DVD+RW disc through the basic engine for verification
of the writing
- Check if an AV2 or AV3 is connected
- Execute DS_BE_GetSelftestResults
- Send the TRAY_IN command
- Send the READ_TOC command
- Generate a random disc location
- Generate test data to write to the DVD+RW
- In case of an AV2 Transfer the test data to the disc location using DMA
- In case of an AV3 Transfer the test data to the disc location using PIO mode ATAPI
WRITE_10
- In case of an AV2 Read back the data from disc using DMA
- In case of an AV3 Transfer the test data to the disc location using PIO mode ATAPI
READ_10
- Compare the two data areas and check whether the areas are equal
Approximately 20 seconds
None