Philips DVDR615 Service Manual page 45

http://www.jdwxzlw.com/?fromuser=华盛维修
Error Number
120400
120401
Example DS:> 1204
120400: Software Diagnostics Version = 0001
Test OK @
Nucleus Name DS_SYS_EepromUpload
Nucleus Number 1205
Description Upload the contents of the NVRAM on the analogue board or the digital board to the
service PC, by using the X-modem protocol
Technical -
-
-
-
Execution Time Depends on the chosen NVRAM and the User.
User Input Choose one of the following parameters for the nucleus:
1.
2.
Choose in the terminal on the control PC -> transfer -> receive file.
Select X-modem protocol. Then click receive in the dialogue and fill in the file name
in which you want to store the data.
Error Number
120500
120501
120502
120503
120504
Example DS:> 1205 1
120500:
Test OK @
Nucleus Name DS_SYS_EepromDownload
Nucleus Number 1206
Description Download a file with the contents of the NVRAM for the analogue board or the digital
board from the service PC to the recorder, by using the X-modem protocol
Technical -
-
-
Execution Time Depends on the chosen NVRAM and the User.
User Input Choose one of the following parameters for the nucleus:
1.
2.
Choose in the terminal of the control PC -> transfer -> send file.
Select X-modem protocol. Then choose a file with the Browse button in the dialogue
and click on send.
Error Number
120600
120601
120602
120603
120604
120605
120606
Example DS:> 1206 1
120600:
Test OK @
Nucleus Name DS_SYS_DvIdNumberSet
Nucleus Number 1207
Description Set the IEEE 1394 unique ID
Technical -
-
-
Execution Time Less than 1 second.
家电维修资料网，免费下载各种维修资料
Diagnostic Software
Description
Getting the Diagnostics software version succeeded
Getting the Diagnostics software version failed
Decode the user input
Determine whether to upload the analogue board or digital board NVRAM
Start uploading using the XMODEM protocol
Determine whether all was uploaded OK
Upload the contents of the NVRAM of the digital board
Upload the contents of the NVRAM of the analogue board
Description
Download succeeded.
User input is not valid.
Something went wrong while copying the data from
NVRAM to SDRAM .
Something went wrong while transferring the data.
User cancelled the upload.
Decode the user input and determine what EEPROM to fill: digital / analogue
Store the downloaded (using XMODEM) bytes in SDRAM first
Then copy these contents into the EEPROM after verification
Download the contents of the NVRAM of the digital board
Download the contents of the NVRAM of the analogue board
Description
Download succeeded
The write to NVRAM failed.
Timeout. Too many retries.
A file was sent with a wrong header.
User cancelled the download.
User input is not valid.
Unknown Error
Decode the user input
Store the id into NVRAM
Validate the segment of storage by updating the checksum
DVDR615/69 5. EN 45