Philips DVDR615 Service Manual page 29

http://www.jdwxzlw.com/?fromuser=华盛维修
Error Number
70400
70401
70402
70403
70404
Example DS:> 704
070400:
Test OK @
Nucleus Name DS_DVIO_DetectNode
Nucleus Number 705
Description Check whether a DV node can be detected by the hardware. This test works for both NTSC
and PAL.
Technical -
-
Execution Time 3 or 5 seconds (3 when OK, 5 when no stream or error)
User Input None
Error Number
70500
70501
70502
70503
70504
Example DS:> 705
070500:
Test OK @
Nucleus Name DS_DVIO_DetectStream
Nucleus Number 706
Description Check whether a DV stream can be detected by the hardware. This test works for both
NTSC and PAL.
Technical -
-
-
Execution Time 3 or 5 seconds (3 when OK, 5 when no stream or error)
User Input None
Error Number
70600
70601
70602
Example DS:> 706
070600:
Test OK @
Progressive Scan (PSCAN)
Nucleus Name DS_PSCAN_DencDevTypeGet
Nucleus Number 800
Description Retrieve the device type information from the progressive scan DENC IC
Technical -
Execution Time Less than 1 second
User Input None
Error Number
80000
80001
80002
80003
80004
80005
Example DS:> 800
080000: Device Type xxxx t.b.d.
Test OK @
家电维修资料网，免费下载各种维修资料
Diagnostic Software
Description
Routing the signals succeeded
The 1394 link chip could not be initialised properly
There was a syntax error in the DV stream
DMA could not copy DV stream to memory. Stream connect-
ed?
DMA not working properly
Initialise the 1394 interface
Detect whether a node is in range
Description
The node was detected OK
The 1394 link chip could not be initialised properly
Unable to write to 1394 PHY chip
Unable to read from 1394 PHY chip
No node was detected
Initialise the 1394 interface
Start receiving the stream
Detect whether the stream is OK
Description
The stream was detected
The 1394 link chip could not be initialised properly
No stream detected
Description
Retrieving the device type information succeeded
The IIC bus was not accessible
There was a timeout reading the device
The IIC acknowledge was not received
Communicating with the progressive scan DENC-IC failed
The initialisation of the IIC bus failed
DVDR615/69 5. EN 29