Philips DVDR615 Service Manual page 36

http://www.jdwxzlw.com/?fromuser=华盛维修
EN 36 5. DVDR615/69
Error
Example (AV2)
Example (AV3)
Nucleus Name
Nucleus Number
Description
Technical
Execution Time
User Input
Error
Example
Nucleus Name
Nucleus Number
Description
Technical
Execution Time
User Input
家电维修资料网，免费下载各种维修资料
Diagnostic Software
Number Description
90800 The command executed successfully
90801 There was a time-out while communicating
90802 The Basic Engine returned an unexpected result
90803 The BE returned an error code
90804 No acknowledge received from BE
90805 Communicating with the Basic Engine failed
90806 The BE returned no info
DS:> 908
Number of times Tray went Open/Closed : 4
Total minutes the CD laser was on
Total minutes the DVD laser was on
Total minutes the write laser was on
090800:
Test OK @
DS:> 908
Number of times Tray went Open/Closed
Total time the power power on (HR:MIN)
Total time of reading CDROM discs (HR:MIN)
Total time of reading high speed CD-R discs (HR:MIN)
Total time of reading other CD-R discs (HR:MIN)
Total time of reading high speed CD-RW discs (HR:MIN)
Total time of reading other CD-RW discs (HR:MIN)
Total time of reading high speed DVD SL discs (HR:MIN)
Total time of reading other DVD SL discs (HR:MIN)
Total time of reading high speed DVD DL discs (HR:MIN)
Total time of reading other DVD DL discs (HR:MIN)
Total time of reading high speed DVD+R discs (HR:MIN)
Total time of reading other DVD+R discs (HR:MIN)
Total time of reading high speed DVD+RW discs (HR:MIN) 0:0h
Total time of reading other DVD+RW discs (HR:MIN)
Total time of writing DVD+R discs at 2.4 x (HR:MIN)
Total time of writing DVD+R discs at 4 x (HR:MIN)
Total time of writing DVD+RW discs at 2.4 x (HR:MIN)
Total time of writing DVD+RW discs at 4 x (HR:MIN)
090800:
Test OK @
DS_BE_StatisticalInformationReSet
909
Reset the statistical information in the basic engine
- Send the RESET_STATISTICAL_INFO command
- Send the POWER_DOWN command
- Toggle the reset pin of the I2S interface
2 seconds
None
Number Description
90900 The command executed successfully
90901 There was a time-out while communicating
90902 The Basic Engine returned an unexpected result
90903 The BE returned an error code
90904 No acknowledge received from BE
90905 Communicating with the Basic Engine failed
DS:> 909
090900:
Test OK @
DS_BE_ErrorLogGet
910
Get the error log from the basic engine
- Check if an AV2 or AV3 is connected
- In case of an AV2 Send the S2B GET_ERROR command
- In case of an AV3 Send the transparent BIT engine GET_ERROR and
GET_FATAL commands
- Display the returned info
Less than 1 second
None
: 0
: 0
: 0
4
0:0h
0:0h
0:0h
0:0h
0:0h
0:0h
0:0h
0:0h
0:0h
0:0h
0:0h
0:2h
0:35h
0:0h
0:0h
0:0h
0:0h