Philips DVDR615 User Manual

Philips dvdr615: software guide

Hide thumbs Also See for DVDR615:

Download this manual See also: Service Manual, User Manual

User Manual for Philips DVDR615 Player Software Upgrade

Introduction

This software can be used to upgrade the following Philips DVD Recorder :

DVPR615/37

After you have completed the upgrade procedure, your DVD Recorder will typically perform

better. What improvements are made depends on the upgrade software you're using as well as

the software that your DVD Recorder contained before the upgrade.

Tools Required

You will need the following items :

• a personal computer

• a CD-R/RW drive and writing application software

• a blank CD-R

How to download the software to your computer

Right mouse button click on the file and click 'Save Target As...' to save the files into

your PC.

Unzip the .zip file and extract files into your PC.

Note : Please do not rename the original filename

How to make an upgrade disc

Write the downloaded file onto a blank CD-R , using the following settings :

• File System CD-ROM ISO Level 2

• Mode 1/2/XA

• Character set ISO 9660

• Finalised, single session

•

Write speed slow

Finalised the disc. (The application may do this automatically.)

NOTE : Packet writing application for drag & drop copying cannot be used for

creating an upgrade disc. Use only a dedicated CD writing application allowing 'disc

at once' recording. No UDF setting as well.

Page 1 User Manual for Philips DVDR615 Player Software Upgrade Introduction This software can be used to upgrade the following Philips DVD Recorder : DVPR615/37 After you have completed the upgrade procedure, your DVD Recorder will typically perform better. What improvements are made depends on the upgrade software you’re using as well as the software that your DVD Recorder contained before the upgrade.
Page 2 OPEN/CLOSE” to close the disc tray. • Player display will show : “Reading” “Busy” “Verify Disc, “Sys Version” “Verify CO, “Verify BE”, “ Verify DL”, “Philips”, “Startup”, “Download CO”, Dwl Done, “Startup” tray will open “Take Disc” • This stage of the procedure takes about 4 - 5 minutes.