Philips DVDR615 Service Manual page 51

http://www.jdwxzlw.com/?fromuser=华盛维修
121704
121705
121706
121707
121708
121709
121710
121711
Example DS:> 1217 82
121700:
Test OK @
Nucleus Name DS_SYS_SlashVersionGet
Nucleus Number 1218
Description Get the slash version of the system
Technical - Issue the command to get the slash version to the analogue board
- Return the received information to the user
Execution Time Less than 1 second.
User Input None
Error Number
121800
121801
121802
121803
121804
121805
121806
121807
121808
Example DS:> 1218
121800: The slash version is: 82
Test OK @
Nucleus Name DS_SYS_Virginize
Nucleus Number 1219
Description (Re-) Virginize the recorder. User data in the NVRAM of the analogue board is cleared
Technical Issue the command to return to the factory defaults to the analogue board
Execution Time 1 second.
User Input None
Error Number
121900
121901
121902
121903
121904
Example DS:> 1219
121900:
Test OK @
Nucleus Name DS_SYS_VirginModeOn
Nucleus Number 1220
Description Turn on the virgin mode functionality (e.g. the auto channel search upon start-up)
Technical Issue the command to set the bit for the virgin mode to the analogue board
Execution Time Less than 1 second.
User Input None
Error Number
122000
122001
122002
122003
家电维修资料网，免费下载各种维修资料
Diagnostic Software
The returned error code from the analogue board is
unknown:
No DS error code known for analogue board error:
There was no response from the analogue board.
Retrieving the current version failed
Unknown recorder layout type
Validating the section where the version is stored failed
Getting the configuration section from NVRAM failed
Initialisation of IIC or reaching NVRAM failed
Description
Getting the slash version succeeded
Getting the slash version failed
The IIC write failed
The IIC read failed
There was no response from the analogue board.
No DS error code known for analogue board error:
Reading the slash version failed
Initialisation of IIC or reaching NVRAM failed
Reading an unexpected section version in NVRAM
Description
Virginization succeeded
Virginization on the Analogue Board failed.
The returned error code from the analogue board is
unknown:
No DS error code known for analogue board error:
There was no response from the analogue board.
Description
Turning on the virgin mode succeeded
Turning on VirginMode on the Analogue Board failed.
The returned error code from the analogue board is
unknown:
No DS error code known for analogue board error:
DVDR615/69 5. EN 51