Philips DVDR615 Service Manual page 43

http://www.jdwxzlw.com/?fromuser=华盛维修
Example (AV2) DS:> 930
093006: This nucleus is not supported by the engine
Error @
Example (AV3) DS:> 930
093000:
Test OK @
Nucleus Name DS_BE_AdjustLaserControl
Nucleus Number 931
Description Adjust the DVD-M (with the OPU) with PCBA. (So adjusts the two PCBS to each other)
Technical -
-
-
Execution Time 30 seconds
User Input None
Error Number
93100
93101
93102
93103
93104
93105
93106
93107
Example (AV2) DS:> 931
093107: This nucleus is not supported by the engine
Error @
Example (AV3) DS:> 931
093100:
Test OK @
家电维修资料网，免费下载各种维修资料
Diagnostic Software
Check if an AV2 or AV3 is connected
In case of an AV2 display a "not supported" message
In case of an AV3 adjust the DVD-M (with the OPU) with PCBA by sending a
S2B command to align the PCBs to each other.
Description
The command executed successfully
There was a time-out while communicating
The Basic Engine returned an unexpected result
The BE returned an error code
No acknowledge received from BE
Communicating with the Basic Engine failed
Unable to enter service mode
This nucleus is not supported by the engine
DVDR615/69 5. EN 43