Philips DVDR615 Service Manual page 62

http://www.jdwxzlw.com/?fromuser=华盛维修
EN 62 5. DVDR615/69
Technical
Execution Time
User Input
Error
Example
Nucleus Name
Nucleus Number
Description
Technical
Execution Time
User Input
Error
Example
Nucleus Name
Nucleus Number
Description
Technical
Execution Time
User Input
Error
Example
家电维修资料网，免费下载各种维修资料
Diagnostic Software
- Initialise the display.
- Display the key pressed by the user on the display.
- Monitor the service port for an abort and get the next key pressed.
- Update the display and repeat previous steps until user stops / confirms.
- Display the number of keys that were pressed.
Depends on the user.
None
Number Description
161200 Checking all keys succeeded
161201 IIC-bus communication failed
161202 The user signals a failure of the keyboard
161203 The user aborted the test
DS:> 1612
161200:
Test OK @
DS_ASP_RemoteControl
1613
This nucleus checks the interface to the remote control by having the user confirm the
key-code displayed. At least one key must be tested. If the user presses a or A the test
is aborted. If the user presses o or O the test is indicated as OK. If the user holds down
PLAY for more than a second the test is indicated as OK, if the user holds down
RECORD the test is indicated as failed.
- Initialise the display.
- Display the key pressed by the user on the display.
- Monitor the service port for an abort and get the next key pressed.
- Update the display and repeat previous steps until user stops / confirms.
- Display the number of keys that were pressed.
Depends on the user.
None
Number Description
161300 The test succeeded
161301 IIC-bus communication failed
161302 The user signals a failure of the remote control
161303 The user aborted the test
DS:> 1613
161300:
Test OK @
DS_ASP_LEDsOn
1614
This nucleus switches on the RECORD, TRAY, and EPG-LED, when available
- Check if the analogue board is a MOBO board, if so:
- Read the ASP pio port.
- Set the RECORD-LED bit on in this port.
- Write the ASP pio port.
- Read the ASP pio port.
- Set the TRAY-LED bit on in this port.
- Write the ASP pio port.
- Read the ASP pio port.
- Set the EPG-LED bit on in this port.
- Write the ASP pio port.
- Else
- Set the RECORD-LED bit on.
- Write the external ASP pio port.
- Set the TRAY-LED bit on.
- Write the external ASP pio port.
- Set the EPG-LED bit on.
- Write the external ASP pio port.
Less than 1 second.
None
Number Description
161400 Switching on the LEDs succeeded
161401 IIC-bus communication failed
DS:> 1614
161400:
Test OK @