Daher-Socata TBM 900 Pilot's Information Manual page 497

PILOT'S OPERATING HANDBOOK
G - Reconditioning
1) Make sure the work area is clean and free from debris.
2) Determine weight and balance (refer to Section 6).
3 - ADDITIONAL CONFIGURATIONS
WARNING
: REMOVED SEATS CAN ONLY BE INSTALLED AT THEIR ORIGINAL LOCATION. REAR
SEAT (L.H. OR R.H.) IS THE ONLY ONE WICH CAN BE INSTALLED IN CABIN AXIS, ON
BOTH CENTRAL RAILS – REFER TO SECTION 7.
Many combinations of accommodations are authorized with seats (rear and intermediate)
by pilot or service centers and cabinet(s) by service centers only. However, the pilot must
ensure that he gets all necessary authorizations from his regulatory authority.
To remove or install these elements, use Paragraph 1 or 2 – (refer to Table 1).
After these operations, determine weight and balance with the new index (refer to Section
EQUIPMENT
REAR SEAT
INTERMEDIATE SEAT
CARGO NET
Edition 0 -- October 31, 2013
Rev. 1
HANDLING, SERVICING AND MAINTENANCE
NOTE
NOTE
NOTE
6).
ACTION
REMOVAL
INSTALLATION
REMOVAL
INSTALLATION
INSTALLATION
Table 1
SECTION 8
DESCRIPTION
OPERATION
Paragraph 1.C.
Paragraph 2. F.
Paragraph 1.D.
Paragraph 1.G.
SECTION 7
Page 8.10.5