Daher-Socata TBM 900 Pilot's Information Manual page 493

PILOT'S OPERATING HANDBOOK
8.10 - PREPARATION
FURNISHINGS)
IN ANY ACCOMMODATION, MAKE SURE ACCESS TO EMERGENCY EXIT IS FREE.
REMOVED EQUIPMENT ITEMS MUST BE STOWED IN A PLACE WHICH ENSURES THEIR
Many accommodations are authorized by Daher Socata. They are enumerated in Section 7.
This procedure specifies how to change your 6-seat accommodation into 4-seat accommodation, and conversely.
However, it can be used partly to remove or install an equipment item.
However, the pilot must ensure that he gets all necessary authorizations from his regulatory authority.
1 - CONVERSION OF 6-SEAT ACCOMMODATION INTO 4-SEAT ACCOMMODATION (Figures 8.10.1,
8.10.2, 8.10.3 and 8.10.4)
A - Tools and consumable materials
- Seat protective covers
B - Preparation
1) Make sure the "SOURCE" selector is set to "OFF" and the crash lever is down.
C - Removal of rear seats (Figure 8.10.1)
1) To remove rear seats, perform the following operations
IN ORDER TO PREVENT CUSHION COVERING DAMAGE, PROTECTIVE COVERS SHOULD
a) Install protective covers.
b) Unlock backrest using backrest tilting handle (6) and fold it forward.
For the R.H. rear seat, backrest tilting handle is located behind backrest.
c) Clear the carpet from under the seat to facilitate moving in rails.
d) Unlock seat using seat tilting handle (1) and tilt it forward.
e) Hold the seat in tilted position and unscrew quick links (7) of strap (9) located under L.H.
seatpan.
f) Pull up and hold L.H. and R.H. rings (2), and turn knobs (8) by 90° in order to release and keep
locks (3) in up position.
Edition 0 -- October 31, 2013
Rev. 1
HANDLING, SERVICING AND MAINTENANCE
OF THE
WARNING
CAUTION
INTEGRITY.
CAUTION
BE PUT ON SEATS.
NOTE
NOTE
This operation is specific to L.H. seat.
AIRPLANE (EQUIPMENT
SECTION 8
AND
Page 8.10.1