Cooling Fan Reassembly (Brutale 910 S-Rmy 2007) - MV Agusta F4 BRUTALE 750 ORO Workshop Manual

Ensure that the protective sheath (2) is inserted on the
fan wiring.
Position the wiring of the upper electric cooling fan as
indicated in the figure.
Insert the electrical connector into its tongue support in
the area indicated of the fan frame and fix the cable
using the appropriate tear clamps (1) as shown in the
figure.
To avoid possible contact between the elec-
tric lead and the exhaust tube, ensure that
the lead is correctly positioned.
COOLING FAN REASSEMBLY (BRUTALE 910 S-R
MY 2007)
Reassemble the cooling fan unit by commencing with
the left fan.
Fit the cooling fan (2) into its support (4).
Tighten the three blocking nuts (1), setting the cooling
fan between the support and guard (3).
Cooling fan nut coupling torque
4.5-6 Nm
L
Position the reassembled cooling fan on to the radiator.
Attach the left fan unit to the radiator without tightening.
Cooling system and lubrication system
- 16 -
1
1
2
3
4
2