MV Agusta F4 BRUTALE 750 ORO Workshop Manual page 282

Suspension and wheels
Using a ring spanner, adjust the half connecting rod
distancing by regulator (1) until the required X1 level is
reached.
1
Tighten the fixing screws of the semi-connecting rods
F
to the prescribed torque pressure.
Torque pressure: 8÷10 N•m
8÷10 N•m
Press down on the seat so that the shock absorber is
compressed and then let it go back into its resting posi-
tion.
- 70 -