MV Agusta F4 BRUTALE 750 ORO Workshop Manual page 175

Insert the battery into the appropriate
The initial battery charge should be carried
out before mounting it on the motorcycle.
Battery terminal assembly
Assemble the two positive (+) terminal leads on the
relative battery pole, respecting the order shown in the
figure.
Pay attention to the colours of the cable in order to
position them correctly.
Rotate the screw of positive terminal leads and tighten
to the prescribed torque using a torque wrench.
Torque pressure: 7 ÷ 8 N•m
Electrical system
compartment.
- 11 -
7 ÷ 8 N•m
E