MV Agusta F4 BRUTALE 750 ORO Workshop Manual page 101

Maintenance
Turn the screw of the positive terminals and tighten
them complying with the prescribed torque by using a
torque wrench.
B
B
Torque wrench setting: 7 ÷ 8 Nm
7 ÷ 8 N•m
When the leads are mounted, replace the protection
cover on the positive pole (see the figure).
Mount the two negative terminal (-) leads on the relati-
ve pole of the battery following the placement shown in
the figure.
- 85 -