MV Agusta F4 BRUTALE 750 ORO Workshop Manual page 58

Using fine abrasive paper clean the first threading "cre-
sts"of the fuel probe seat as shown in the figure.
This operation is necessary to not compromise the
B
good condition of the gasket during the assembly
phase of the probe.
Place the fuel filter on the pump in according to the
timing shown in the figure.
Operate with care so that the net filter is not
damaged.
Assemble the CLIC R 96 135 fastener (1) –green
colour – onto the tube as shown in the figure.
Maintenance
- 42 -
1