MV Agusta F4 BRUTALE 750 ORO Workshop Manual page 234

Reassemble the hydraulic brake adjuster under com-
pression into its seat by utilising a new O-ring seal.
Torque pressure of the compression hydrau-
lic brake adjuster : 20 N•m
Insert the internal rod.
F
Insert the spring spacer.
Maintain the sleeve in a vertical position. Introduce the
following amount of oil:
- BRUTALE 750 ORO / 750 S (MY 03): 646 cc
- BRUTALE 750 S (MY 04):
- BRUTALE 910 S:
- BRUTALE 910 R:
Press the pump rod up and down until a perfect fluidity
of movement is obtained.
Recommended oil:
- BRUTALE 750 ORO / 750 S (MY 03): SAE 5
- BRUTALE 750 S (MY 04):
- BRUTALE 910 S:
- BRUTALE 910 R:
Suspension and wheels
665 cc
665 cc
718 cc
SAE 7,5
SAE 7,5
SAE 7,5
- 22 -
20 N•m