MV Agusta F4 BRUTALE 750 ORO Workshop Manual page 107

Maintenance
Resetting of the tripmeters
The values of the "TRIP 1" and "TRIP 2" can be reset
as follows.
B
Press the starter button to activate the "TRIP 1".
Press the starter button for more than four seconds.
The value will start to flash.
Press the starter button for less than four seconds; the
value zeroes. If instead the starter button is pressed for
more than four seconds, the resetting procedure is
interrupted.
Pressing the engine starting button, activate the func-
tion "TRIP 2".
Press the engine starting button for more than four
seconds; the value starts to blink.
Now pressing the engine starting button for less than
four seconds the value is set to zero.
If you press the engine starting button for more than
four seconds the zero setting is interrupted.
- 91 -