MV Agusta F4 BRUTALE 750 ORO Workshop Manual page 158

Throttle body position
The sensor of the throttle position is situated on the
right side of the throttle body.
This sensor is a potentiometer with a resistance which
varies according to the opening angle of the accelera-
tor.
The sensor is supplied by the ECU at a stabilised vol-
tage of 5V and supplies an output voltage proportiona-
te to the throttle angle.
The basic injection time of the fuel (volume) is deter-
mined according to the output voltage of this sensor.
The voltage increases when the accelerator opening is
D
increased.
RESISTANCE TEST ' A - C
FEED TEST ' (~ 4,9 ± 1 volt)
Air intake injection system
Output voltage
(V)
A –
B –
C –
- 14 -
throttle's angle
– (pin 16)
+ 5V (pin 14)
Signal (pin 30)