Disconnect the connector (1) of the water temperature
sensor to the instrumentation panel on the left side of
the motorcycle.
Remove the clamp (1) on the water suction pipe cou-
pling from the pump to the radiator using the specific
pliers CLIC R 205.
Specific tool - pliers CLIC R 205
L
Remove the clamp (1) on the water inlet pipe coupling
to the radiator from the thermostat valve using the spe-
cific pliers CLIC R 205.
Specific tool - pliers CLIC R 205
Cooling system and lubrication system
- 10 -
1
1
1