MV Agusta F4 BRUTALE 750 ORO Workshop Manual page 27

To accede to the oil filter and the discharge and filling
holes of the engine oil, it is necessary to carry out cer-
tain operations beforehand:
•
Place the motorcycle on the rear stand.
The substitution of the engine oil must
N.B.
be done with a hot engine as opposed to
the oil-check that is done with a cold
engine.
Place a container underneath the engine to collect the
used oil.
Remove the oil discharge plug (1).
Recover the oil in an appropriate container.
Do not scatter the drainage oil into the envi-
ronment.
Remove the oil filler plug (1) on the right side of the
motorcycle so that it facilitates the discharge of the
used oil.
Only for the Brutale 910 S - 910 R models: Remove
the filler cap (1) using the 10 mm hexagonal bar atta-
ched to a wrench.
Wait until the lubrication system is completely empty of
used engine oil.
Substitution of the oil filter
Release the two side clamps of the oil cooler.ly
towards the right of the vehicle.
Maintenance
BRUTALE
1
- 11 -
1
910 S - R
1
B