MV Agusta F4 BRUTALE 750 ORO Workshop Manual page 72

Hide thumbs Also See for F4 BRUTALE 750 ORO:
Table of Contents

Advertisement

Maintenance
Check the throttle angle when the throttle is completely
closed.
• BRUTALE 750 ORO-S:
B
Default value: 1.7°
Huntings between 1.5° and 1.7° are allowed only if the
engine is started.
A value above 1.7° is not allowed.
• BRUTALE 910 S-R (MY 05/06):
Default value: 2.3°
Huntings between 1.9° and 2.1° and between 2.3° and
2.5° are allowed only if the engine is started.
A value above 2.5° is not allowed.
If necessary adjust the throttle opening using only the
appropriate screw on the throttle opening pulley.
It is recommended not modify the throttle potentiome-
ter position because the throttle has been set during
the production to the optimal value.
Remove the sealing caps of the small tubes to check
the vacuum pressure.
The number of the cylinder to which the caps are con-
nected is written on the caps.
The small tubes for checking the vacuum pressure are
situated on the left and right side of the motorcycle.
- 56 -

Advertisement

Table of Contents
loading

This manual is also suitable for:

750 s910 s910 r

Table of Contents