MV Agusta F4 BRUTALE 750 ORO Workshop Manual page 45

Rotate the camshaft by turning the central nut in an
anti-clockwise direction to bring piston N° 1 of the engi-
ne to the Top Dead Centre position (T.D.C.) when the
piston is at its uppermost part of the compression
stroke.
Check the timing of the engine by ensuring that the
incision stamped on tooth (A) of the timing wheel is in
line with the "tooth" (B) that is present on the engine
casing.
The position of the timing wheel is clearly seen in the
enlargement in respect of the mark on the engine
casing.
Also the marks present on the toothed wheels of the
camshaft must be aligned together when the timing
wheel is in this position.
Maintenance
- 29 -
B
A
B