Battery Life And Replacement; Overview; Important Notes - AMX MVP-5200i-GB Instruction Manual

Battery Life and Replacement

Overview

The battery powering the MVP-5200i is designed for upwards of 300 deep discharge rechargings. Regular shallow rechargings will
extensively increase expected battery life, and the device should be stored in either the Table Charging Station or the Wall Charging
Station when not in use to keep it at an optimum charge. The battery has reached its effective end of life after it can no longer hold
more than a 70 percent charge
NOTE: Lithium-Polymer batteries are small, compact, and ideal for providing long lasting power. However, they must be used and
charged properly. Improper use can result in serious injury, f ire, or death. Please read and understand the following warnings. If you
have any questions or concerns with this product, please contact your AMX sales representative.
NOTE: This installation requires opening the case of the MVP-5200i and working within its internal components. If you are unwilling
or unable to replace the battery, please return the device to AMX for battery replacement.
WARNING: Misuse of a Lithium-Polymer battery may result in overheating, f ire, or explosion! To Avoid Injury,
Never:
Use near open flame or other heat source

Puncture or disassemble battery

Damage external contacts

Dispose of battery in fire,

Always:
Use only with AMX approved battery charger

Store in dry place with temperature between 0° C (32° F) and 40° C (104° F)

CAUTION:

IMPORTANT NOTES!

Lithium-Polymer battery technology degrades in capacity over time, unless the battery is periodically charged and

discharged. AMX recommends installing all Lithium-Polymer batteries in functional AMX products within 6 months of
receipt.
Please dispose of all used batteries in a proper fashion as required by municipal or federal regulations.

Prior to battery removal, run the device until the battery is completely discharged.

MVP-BP-5X Battery Pack (FG5966-01BAT) Specif ications
Dimensions:
Weight:
Certifications:
Operating/Storage
Environment
Included Parts
MVP-5200i Modero® ViewPoint® Touch Panel with Intercom - Instruction Manual
water, or container with temperature above 100ºC (212ºF).
Care must be taken to install the battery without damaging the battery.
4 1/8" x 2 1/2" x 3/8" (10.48 cm x 6.35 cm x 0.95 cm)
0.35 lbs (158.76 g)
• CE (pending)
• IEC/EN-60950
• RoHS
• UN/IATA
• UL (pending)
• Operating Temperature: 0° C (32° F) to 45° C (113° F)
• Operating Humidity: 20% - 85% RH
• Storage Temperature: -20° C (-4° F) to 60° C (140° F) for periods of less than one month,
-20° C (-4° F) to 45° C (113° F) for less than three months but greater than one month, and
-20° C (-4° F) to 20° C (68° F) for less than one year but greater than three months
• Storage Humidity: 5% - 85% RH
• Replacement MVP-5200i battery (57-0016-SA)
• Upper rubber feet (screw covers, black, 60-5966-13BL; and gray, 60-5966-13GR)
• Replacement label to cover lower screws: black (91-5966-01BL) and white (91-5966-01WH)
• Bottom rubber feet (black, 60-5966-12BL; and Grey, 60-5966-12GR)
Battery Life and Replacement
124