Bop; Bor; Bos - AMX MVP-5200i-GB Instruction Manual

Button Commands (Cont.)

^BOP

Set the button opacity. The button opacity can be specified as a decimal between 0 - 255, where zero (0) is invisible and 255 is
opaque, or as a HEX code, as used in the color commands by preceding the HEX code with the # sign. In this case, #00
becomes invisible and #FF becomes opaque. If the opacity is set to zero (0), this does not make the button inactive, only
invisible.
Syntax:
Variable:
Example:
?BOP Get the overall button opacity.
Syntax:
Variable:
Example:
Gets the button 'OFF state' opacity information.
The result sent to the Master would be:

^BOR

Set a border to a specific border style associated with a border value for those buttons with a defined address range. Refer to
the Border Styles and Programming Numbers table on page 87 for more information.
Syntax:
Variable:
Examples:
The border style is available through the TPDesign4 border-style drop-down list. Refer to theTPD4 Border Styles by Name table
on page 88 for more information.

^BOS

Set the button to display either a Video or Non-Video window.
Syntax:
Variable:
Example:
MVP-5200i Modero® ViewPoint® Touch Panel with Intercom - Instruction Manual
"'^BOP-<vt addr range>,<button states range>,<button opacity>'"
variable text address range = 1 - 4000.
button states range = 1 - 256 for multi-state buttons (0 = All states, for General buttons 1 = Off state and 2 = On state).
button opacity = 0 (invisible) - 255 (opaque).
SEND_COMMAND Panel,"'^BOP-500.504&510.515,1,200'"
SEND_COMMAND Panel,"'^BOP-500.504&510.515,1,#C8'"
Both examples set the opacity of the buttons with the variable text range of 500-504 and 510-515 to 200.
"'?BOP-<vt addr range>,<button states range>'"
variable text address range = 1 - 4000.
button states range = 1 - 256 for multi-state buttons (0 = All states, for General buttons 1 = Off state and 2 = On state).
custom event type 1015:
Flag - Zero
Value1 - Button state number
Value2 - Opacity
Value3 - Zero
Text - Blank
Text length - Zero
SEND COMMAND Panel,"'?BOP-529,1'"
ButtonGet Id = 529 Type = 1015
Flag = 0
VALUE1 = 1
VALUE2 = 200
VALUE3 = 0
TEXT =
TEXT LENGTH = 0
"'^BOR-<vt addr range>,<border style name or border value>'"
variable text address range = 1 - 4000.
border style name = Refer to the Border Styles and Programming Numbers table on page 87.
border value = 0 - 41.
SEND_COMMAND Panel,"'^BOR-500.504&510.515,10'"
Sets the border by number (#10) to those buttons with the variable text range of 500-504 & 510-515.
SEND_COMMAND Panel,"'^BOR-500.504&510,AMX Elite -M'"
Sets the border by name (AMX Elite) to those buttons with the variable text range of 500-504 & 510-515.
"'^BOS-<vt addr range>,<button states range>,<video state>'"
variable text address range = 1 - 4000.
button states range = 1 - 256 for multi-state buttons (0 = All states, for General buttons 1 = Off state and 2 = On state).
video state = Video Off = 0 and Video On = 1.
SEND_COMMAND Panel,"'^BOS-500,1,1'"
Sets the button to display video.
Programming
97