AMX MVP-5200i-GB Instruction Manual page 21

MVP-WCS-52 Specif ications
Dimensions (HWD):
Power Requirements: • 3 A @ 12 VDC (Class II listed power supplemented)
Startup Power
Requirements
Weight:
Available Colors:
Front Panel
Components:
Operating/Storage
Environments:
Included
Accessories:
Other AMX
Equipment:
The MVP-5200i touch panel remains locked in the MVP-WCS-52 until unlocked by the user. This may be done by entering an
appropriate password (refer to the Password Settings Page section on page 67 for more information), or by pressing the Security
Release button on the front of the device in emergencies.
The station ejects the device top first (FIG. 9). The device uses two neodymium rare-earth magnets to keep the MVP-5200i from
falling out of its cradle when the touch panel is angled forward.
MVP-WCS-52-GW Wall Charging Station - Side view
FIG. 9
MVP-5200i Modero® ViewPoint® Touch Panel with Intercom - Instruction Manual
• 8.375" x 6.09" x 2.19" (21.27 cm x 15.46 cm x 5.56 cm)
Note: Always use the cutout/installation dimensions for the MVP-WCS-52 when installing this unit into various
surfaces. This SP engineering drawing is available online at www.amx.com.
• Total: 1.7A
• Charging: 1.1A
• Ejection: 0.6A
• Without box: 0.85 lbs (0.39 kg)
• With box: 1.30 lbs (0.59 kg)
• MVP-WCS-52-GW (White) - FG5966-13
• MVP-WCS-52-GB (Black) - FG5966-12
• Securing Magnets: Prevent MVP touch panel from falling free during ejection.
• Security Latch: Adds the primary layer of security when mounting an MVP touch panel. When the device is
inserted, this latch grabs onto the rear of the touch panel and secures it to prevent it from being removed.
• Interface Connector Pins: A set of retractable pins (male) that connect to the underside MVP connector strip.
This connection provides both communication and power between the touch panel and the MVP-WCS-52.
• Support Cradle: This retractable mechanism supports a resting MVP panel and allows a user to either insert or
remove a connected MVP panel.
• Security Release pushbutton: Located on the front of the unit, this pushbutton toggles an on-screen security
keypad (if security is enabled). Entering the correct release code allows the MVP-WCS-52 to release the touch
panel from the security latch.
• Operating Temperature: 0° C (32° F) to 40° C (104° F)
• Operating Humidity: 20% - 85% RH
• Storage Temperature: -20° C (-4° F) to 60° C (140° F)
• Storage Humidity: 5% - 85% RH
• MVP-WCS-52 Wall Charging Station Quick Start Guide (93-5966-12)
• Wallmount plastic back box (62-5966-12)
• MVP-WCS-52 Installation Kit - Black (KA 5966-01bl)
• MVP-WCS-52 Installation Kit - White (KA 5966-01wh)
• MVP-WCS-52 Wall Charging Station Template (68-5966-01)
• MVP-TCS-52: Table Charging Station (FG5966-1X)
• Wallmount Metal Rough-In Box (FG037-11)
• PSN4.4 13.5 VDC, 4.4 A Power Supply with 3.5 mm Phoenix Connector (FG423-45)
• PSN6.5 13.5 VDC, 6.5 A Power Supply with (3) 3.5 mm Phoenix Connectors (FG423-41)
• MVP-5200i Modero Viewpoint Widescreen Touch Panel -Gloss Black (FG5966-01)
• MVP-5200i Modero Viewpoint Widescreen Touch Panel - Gloss White (FG5966-02)
• PS3.0 Power Supply (FG423-30)
Wall Charging Station
MVP-5200i
Security Release button
Accessories
21