Table of Contents
Advertisement
NetLinx Workspace window (showing panel connection via a Virtual NetLinx Master)
FIG. 76
NOTE: The panel-specif ic f irmware is shown on the right of the listed panel. Download the latest f irmware f ile from
www.amx.com and then save the Kit f ile to your computer. Note that each Kit f ile is intended for download to its corresponding
panel. In some cases, several Kit f iles may be included in a .zip f ile; extract the .zip f ile to access the required Kit f ile.
5.
If the panel firmware version is not the latest available; locate the latest firmware file from the www.amx.com > Tech Center
> Firmware Files > Modero Panels section of the website.
6.
Click on the desired Kit file link and after accepting the Licensing Agreement, verify download of the Modero Kit file to a known
location.
7.
Select Tools > Firmware Transfers > Send to NetLinx Device from the main menu to open the Send to NetLinx Device dialog
(FIG. 77). Verify that the panel's System and Device number values match those values listed within the System folder in the
OnLine Tree tab of the Workspace window.
Send to NetLinx Device dialog
FIG. 77
8.
Select the appropriate Kit file from within the Browse for Folder window (FIG. 78).
Browse for Folder window
FIG. 78
MVP-5200i Modero® ViewPoint® Touch Panel with Intercom - Instruction Manual
Upgrading Firmware
74
Advertisement
Table of Contents
