Power Management Page - AMX MVP-5200i-GB Instruction Manual

Power Management Page

The options on the Power Management page allow setting of power warning preferences and battery status information, and
adjustment of the display times for battery warnings (FIG. 54).
Power Management page
FIG. 54
Features on this page include:
Power Management Page
Back:
WiFi/Wired/USB Icon:
Connection Status icon: The icon in the upper-right corner of each Setup page provides a constant visual indication of current
Power Settings:
Sleep:
Stand By:
Shutdown:
Disable on External
Power:
Auto Dim:
Battery Charge Status:
Battery Level Port:
Battery Level:
Battery Type:
MVP-5200i Modero® ViewPoint® Touch Panel with Intercom - Instruction Manual
Saves all changes and returns to the previous page.
The icon to the left of the Connection Status Icon displays whether the current connection to the Master is
Wireless (image of a radio antenna), Wired (image of three networked computers), or USB (USB connection
symbol).
connection status.
Note: a Lock appears on the icon if the panel is connected to a secured NetLinx Master.
The three settings in the Power Settings section may be selected by touching either the arrow to the left of each
setting or by touching the entry itself. Each is highlighted with a green arrow to the left when selected.
This value determines the number of seconds or minutes that need to pass before the panel automatically goes
into Sleep Mode. Once asleep, the device may be awakened by touching the buttons on either side of the screen
or the screen itself. Use the Up/Down arrows to change the settings; the setting bar will change from blue to
green to display the percentage of minimum versus maximum.
Range = 10, 15, 20, 25, 30 seconds; 5, 15, 30 minutes; 1, 2 hours Default = 2 hours
This value determines the number of seconds or minutes that need to pass before the panel automatically goes
into Standby Mode. Once in standby, the device may be awakened by touching the screen. Use the Up/Down
arrows to change the settings; the setting bar will change from blue to yellow to display the percentage of
minimum versus maximum. A value of Off disables this feature.
Range = 15, 30 minutes; 1, 2, 3, 4 hours Default = Off
This value determines the number of hours or minutes that need to pass before the panel automatically shuts
down. Once shut down, the device will have to be restarted. The Up/Down buttons alter the timeout value (in
minutes). Use the Up/Down arrows to change the settings. A value of Off disables this feature.
Note: Shutdown mode turns the unit completely off, including communication circuits, and preserves battery life,
unlike Sleep mode, which only turn off the display. From Shutdown mode, a unit may be turned on by touching the
screen.
Range = 3, 5, 10, 15, 30 minutes; 1, 2, 3, 4 hours Default = Off.
This button acts as a power save feature with two options:
• On - Clicking on this button causes the Sleep mode to become disabled when external power is applied.
• Off - Clicking on this button deactivates this power save feature.
When enabled, Auto Dim will engage at half the time set under the Sleep setting or after five minutes, whichever
is sooner.
The Battery Charge Status field indicates the power charge currently available on the battery.
The Battery Level Port field indicates the port being used to report charge status levels back to the NetLinx
Master (set in TPDesign4).
The Battery Level field indicates the level being used to report status levels back to the NetLinx Master (set in
TPDesign4).
The Battery Type field indicates the type of battery currently installed in the MVP-5200i. The value listed is
XPX5000B, 2, or 3.
Setup Pages
50