Roll Media Length Menu; Centronics Menu - MUTOH Rockhopper II User Manual

4 Handling the printer
Setup items
Roll media setup

4.4.50 Roll media length menu

Set roll media length.
Setup items
Roll media 1-4

4.4.51 Centronics menu

Set communication mode to Centronics interface.
Parameters
Disable
Roll media 1
Roll media 2
Roll media 3
-
Parameters
1 m to <30 m>to 99 m
Rockhopper II - User's Guide
Descriptions
Set this when roll media setup is not used.
For each setup value of roll media, 3 settings of "Roll media
1" - "Roll media 3" can be set.
4.4.50 Roll media length menu
• [CANCEL] key: Shift to the previous hierarchy menu.
4.4.1 Setup menu
Descriptions
Change roll media length by operating the following keys.
• [F2] key: Increase setup value.
• [F4] key: Decrease setup value.
• [ENTER] key: Confirm setup value, shift to the previous
hierarchy menu.
• [CANCEL] key: Cancel setup value, shift to the previous
hierarchy menu.
4.4.49 Roll Media setup menu
4-37