Maintenance
Semi-Annual
• Lubricate the chains, and gears.
( Performed by a qualified Service
Technician )
• Check wire termination tightness.
( Performed by a qualified Service
Technician )
Remove power from the laminator before
servicing. You can be severely shocked,
killed or cause a fire.
8.2 Cleaning the rollers
The following procedure is performed
while the laminator is HOT!
Use extreme caution!
Heating components are HOT!
You can become severely burned !
Page 8 - 2
ELECTRICAL
S H O C K
CAUTION
WARNING
Titan 110/ 165 Operation and Maintenance Manual
Never clean the rollers with sharp or
pointed objects. You may put
irreparable cuts into the rollers.
Harden adhesive deposits on the rollers can
cause damage to the rollers.
Do NOT pick or pull heat activated adhesive
off the rolls when they are cold. You can
cause irreparable damage to the
The most efficient time to clean the rollers is
after a lamination process is completed.
© GBC Films Group November 2000
CAUTION
CAUTION
CAUTION
laminating rolls.
INFORMATION