GBC TITAN 110 Operation & Maintenance Manual page 17

Safety
The unpacking process requires at least two
people. You can be severely injured, crushed
or cause damage to the laminator.
Do not allow the top to fall into the crate. It
can damage the laminator.
INFORMATION
Do not put packing screws on the floor.
They can cause problems when trying to roll
the laminator into position or you can
become injured if stepped on.
A second person must support the side
labeled 5 in Figure 4.5.1 It can fall and
damage the laminator or cause harm to you
and others.
Page 1 - 6
WARNING
CAUTION
CAUTION
Titan 110/ 165 Operation and Maintenance Manual
GBC Films Group's warranty does not
cover malfunction of the equipment due to
mishandling and / or tipping. GBC Films
Group bears no responsibility for personal
injury or damage due to moving the
laminator improperly.
About recycling: The crate components can
be reused for shipping the laminator again
or can be disassembled and the wood and
screws recycled. The shrink wrap is not
recyclable, so it must be discarded.
Do not wear ties, loose fitting clothes or
dangling jewelry while operating or
servicing the laminator. These items can get
caught in the nip and choke you or you can
be crushed or burned.
If a safety feature is not functioning
properly, contact your local service
representative immediately
© GBC Films Group November 2000
INFORMATION
INFORMATION
WARNING
WARNING