GBC TITAN 110 Operation & Maintenance Manual page 84

Titan 110/ 165 Operation and Maintenance Manual
INFORMATION
The temperature may differ with regards
to your laminate. The temperature used
is for instructional purposes only.
Caution should always be exercised
when using the laminator with
the safety shield removed.
You can be seriously HURT or INJURED!
d) Remove the safety shield.
e) Remove the feed table
© GBC Films Group November 2000
WARNING
CAUTION
Ensure the roll of laminate is loaded
properly on the unwind shaft.
Exposed adhesive should be facing
away from the heated components.
This will prevent hours of cleaning!
f) Place one roll of film on the upper unwind and
center it to the main rollers.
g) Place one roll of film on the lower unwind shaft.
Applications
Page 6 - 9