GBC TITAN 110 Operation & Maintenance Manual page 51

Installation
e) Press . The fans turn on.
COOLING
f) Press a second time. The fans turn off.
COOLING
g) Press . The bottom rollers begin turning
R U N
towards the rear of the laminator.
Page 4 - 14
Titan 110/ 165 Operation and Maintenance Manual
h) Press SPEED
SPEED increases with a maximum setting of
9. The rollers increase in speed with each
increment
i) Press SPEED
SPEED decreases with a minimum setting of
1. The rollers decrease in speed with each
increment
j) Press
STOP
© GBC Films Group November 2000
. Numeric value for
. Numeric value for
. The bottom rollers stop turning.